- ABOUT US
- NEWS & EVENTS
- CONTACT US
In the operation process of the rotary kiln, vibration may occur. How to reduce the occurrence frequency of the vibration of the rotary kiln is a problem concerning many customers. Here Hongxing Machinery will help to solve this problem.
The vibration of this machine is manly resulted from the big vibration of the horizontal and vertical direction, but small vibration of the axial direction, which will change the position of the riding wheel of the rotary kiln, and the centre line of the rotary kiln deviates, so this machine will vibrate.
According to the measurement results of the centre line of this equipment and its operation situation, Hongxing Machinery gives relevant solution.
1. Adjustment the riding wheel guided by the measurement result.
2. Since the adjustment is the correction of the barrel of the kiln, and the stress condition of the back riding wheel and the tyre after the adjustment will change, the adjusting principle of “fine turning many times and observing the stress condition while fine turning” should be followed. When the first adjustment is finished, the nest adjustment should be fulfilled after observing the machine for one day or so.
3. In the adjustment process, the workers should take record the temperature of the kiln barrel and the bearing bush and the riding wheel, the speed of the kiln, the amount of the materials that are fed into the kiln and the stress on the hydraulic blocking wheel, and observe the formation condition of the oil slick on the bearing bush and the vibration condition of the kiln and compare the changes before and after the adjustment.
Adjust the machine for one week; the vibration condition of the rotary kiln will be ameliorated significantly.
Hi, may I help you？