Mining EquipmentContact
High Efficiency Classifier
Get 2024 Latest Price List Online Grinding Equipment

High Efficiency Classifier

Production capacity: 9–240 t/h

Feeding amount: 45–720 t/h

Main motor:15–160 kw

Reduction ratio:5–10

Air volume:350–4000 m2/min

The Benefits and Advantages of High Efficiency Classifier

High Efficiency Classifier is a powder separator developed on the basis of traditional High Efficiency Classifier by using the most advanced technology in the international market. Compared with common, the improved O-SEPA separator increases the separation areas of the powder separator, so that the separation ratio of the materials in the actual condition is higher and the powder separation effect is better.

high_efficiency_separator

The Excellent Features of High Efficiency Classifier

This type of powder separator increase the air amount for three times, thus improving the separation efficiency to over 80%, and the separated products are more even and more reasonable in particle distribution, and at the same time, the energy produced by the rotation of the air flow is transmitted to the rotor, thus reducing the electricity consumption of the drive device and avoid the energy consumption of slipstream.

The Working Principle of High Efficiency Classifier

The ground materials are fed in from the upper part of the separator, and after fully scattering by the scattering plate and the dash plate, the materials will go into the separation area. The first air and the secondary air introduced by the tangential pipe also go into the separation area through the turning vane. Influenced by the cage-type rotor and the horizontal separation plate, the separating air flow will form horizontal eddy to separate the materials. The fine powders go into the bag-type dust collector from the upper outlet to become the final products and the coarse powders will fall to the lower cone during the falling process. The materials that finally fall into the cone will be separated by the third air, and the separated fine powders will be brought by the air flow to the upper outlet, and the rest coarse particles will be discharged from the bottom outlet as returning powders and be returned to the grinding mill for re-grinding.

What can you get?

Latest Price List/Free Customized Solution/Maintenance & Installation Guide

Technical Parameter

Product Specification
(mm)
Rev Of Main
Shaft (rpm)
Capacity Of
Separator
(t/h)
Capacity Of Powder
From VSI
Fineness Main Shaft
Motor
Blower
Power
(kw)
Adjustable Range
(rpm)
Rev.
(rpm)
Pressure
(pa)
Wind Content
(m³/s)
Power Of 
(kw)
HX500 190-380 21-60 2-8 Less than 80μm
(100-1000 mesh)
 11 125-1250  1680  2494  29668  30 
HX600 150-350 40-100 6-15 15   125-1250  1200 2400  34996  37
HX700 130-320 70-120 11-20  18.5  132-1320  1000 2390   64118 55 
HX800 120-280 85-150 14-28  30  132-1320  980  2546 86331  90 
HX900 120-280 105-180 20-35  55  132-1320  800 2456  99493 110 
HX1000 120-280 126-250 25-50  75  132-1320  900  2684 136430   132

 

Note:processing Capacity May Vary With Different Materisla Aan Feeding Sizes.

Get Price And Support

Please feel free to write down your requirement in the form below. We will reply you within 24 hours.

  • Product Name
  • Your Name
  • Your email*
  • Phone or Whatsapp
  • Enter the material to be processed, capacity, feeding size(mm), final product size(mm), or other needs.
Email sell@hxjq.com 24 hours online Chat Online

We will strictly protect the privacy of users'personal information and never disclose it.